求老版F460光猫破解四台限制（有ttl启动信息）
此猫的超级用户名和密码是telecomadm与nE7%5m，telnet的密码不知道，用http://192.168.1.1/backupsettings.conf导出的明文配置文件没有找到相关的关键字，百度出一篇36F420-F460光猫的TTL串口线连接方法及其应用看到了启动信息但不知道在哪里登录可用sendcmd命令，贴出些信息望大大们能指点下ttl启动信息如下：?
-----------------------
B O O T L O A D E R
-----------------------
Date : Jun 28 2007 10:12:28
Version : 1.1
Build : 1.19
ZLIB ver : 1.2.3
FLASH size : 8192 KByte (ID: 0x18009F)
1st sector : 8 KByte
Last sector: 64 KByte
NVDB over EEPROM
Press <Enter> for MAINTENANCE
........................................
Loading Image#0 (0x20000)
Uncompressing Linux................................................... done, booting the kernel.
Linux version 2.6.10_mvl401-pas6x01 (root@localhost.localdomain) (gcc version 4.0.3) #100 Mon Nov 12 19:39:43 CST 2007
CPU: ARM922Tid(wb) revision 0 (ARMv4T)
CPU0: D VIVT write-back cache
CPU0: I cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
CPU0: D cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
Machine: PMC PAS6201/PAS6301
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttyAMA0 ro root=0x1F01
PID hash table entries: 128 (order: 7, 2048 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 16MB = 16MB total
Memory: 14568KB available (1382K code, 145K data, 68K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
desched cpu_callback 2/00000000
desched thread 0 started up.
NET: Registered protocol family 16
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 3.1 (2006/08/19) Phillip Lougher
Serial: AMBA PL011 UART driver
ttyAMA0 at MMIO 0x70200000 (irq = 18) is a AMBA/PL011
ttyAMA1 at MMIO 0x70180000 (irq = 7) is a AMBA/PL011
io scheduler noop registered
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
elevator: using noop as default io scheduler
PAS6X01 flash device: at 8000000.
PAS6201/PAS6301 flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
Creating 4 MTD partitions on "PAS6201/PAS6301 flash":
0x000cf724-0x001d9724 : "root fs"
0x007e0000-0x00800000 : "data"
0x00020000-0x00200000 : "first image"
0x00200000-0x00800000 : "second image"
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 68K
set load:111111111111111111111111
PAS6ONU >
****************************************************************************
*COPYRIGHT (C) 2000-2008 PMC-SIERRA, INC. ALL RIGHTS RESERVED. *
*--------------------------------------------------------------------------*
* This software embodies materials and concepts which are proprietary and*
* confidential to PMC-Sierra, Inc. PMC-Sierra distributes this software *
* to its customers pursuant to the terms and conditions of the Software *
* License Agreement contained in the text file software.lic that is *
* distributed along with the software. This software can only be utilized*
* if all terms and conditions of the Software License Agreement are *
* accepted. If there are any questions, concerns, or if the *
* Software License Agreement text file, software.lic, is missing please *
* contact PMC-Sierra for assistance. *
****************************************************************************
HW:
Device : 6301
Minor version : 0'
FW (build on Aug 27 2009 at 17:27:51)
Major version : 1
Minor version : 4
Build No. : 11
Maintenance No. : 101
HOST version : 1.8
FW includes an IP suite!
Firmware supports PAS6201/PAS6301 devices only!
PAS6ONU FW (Linux) starting...
==================================
NOTE: Working in threshold mode (THR5)
ERROR: UNI: Illegal setting of Slave mode and Auto-neg ON!!
NOTE: Auto-neg is set to off
NOTE: User: PON connection is according to PONPWR in EMAPPER
UNI port hook: UNI link is up
UNI port hook: UNI MAC type MII-100
Saving configuration
flatfsd: Wrote 11344 bytes to flash in 1 seconds
the username is:111111111111111111111111::111111111111111111111111, password is:111111111111111111111111::111111111111111111111111
the loid is:111111111111111111111111
ST_save_attention_loid success
the passwrd is:
ST_save_attention_passwrd success
Saving configuration
the key is:111111111111111111111111
ST_save_attention_key success
flatfsd: Wrote 11344 bytes to flash in 1 seconds
ONU APP Timer started successfully
CTC Stack : ******************************
CTC Stack : CTC Stack v3.2.179
CTC Stack : ******************************
Remote Management Distributor Initialized successfully
Init MP alarm, type 2 .
ONU ALARM started successfully
USER : VOIP related CTC hooks set.
in function:eth_set_us_policer_params, line:799
before htonl, the payload is:0
after htonl, the payload is:0
in function:eth_set_us_policer_params, line:799
before htonl, the payload is:0
after htonl, the payload is:0
in function:eth_set_us_policer_params, line:799
before htonl, the payload is:0
after htonl, the payload is:0
in function:eth_set_us_policer_params, line:799
before htonl, the payload is:0
after htonl, the payload is:0
in function:eth_set_ds_rate_limit_params, line:889
before htonl, the payload is:0
after htonl, the payload is:0
in function:eth_set_ds_rate_limit_params, line:889
before htonl, the payload is:0
after htonl, the payload is:0
in function:eth_set_ds_rate_limit_params, line:889
before htonl, the payload is:0
after htonl, the payload is:0
in function:eth_set_ds_rate_limit_params, line:889
before htonl, the payload is:0
after htonl, the payload is:0
get igmp status successful
the action is:1
and the mode is:1
in function:eth_set_multicast_vlan, line:1353
before htonl, the vlan_id is:0
after htonl, the vlan_id is:0
in function:eth_set_multicast_vlan, line:1353
before htonl, the vlan_id is:0
after htonl, the vlan_id is:0
in function:eth_set_multicast_vlan, line:1353
before htonl, the vlan_id is:0
after htonl, the vlan_id is:0
in function:eth_set_multicast_vlan, line:1353
before htonl, the vlan_id is:0
after htonl, the vlan_id is:0
in function:eth_set_multicast_group_count_hook, line:2672, port1, Num:255
in function:eth_set_multicast_group_count_hook, line:2672, port2, Num:255
in function:eth_set_multicast_group_count_hook, line:2672, port3, Num:255
in function:eth_set_multicast_group_count_hook, line:2672, port4, Num:255
in function:eth_action_phy_admin_control, line:2697, port1, action:2
in function:eth_action_phy_admin_control, line:2697, port2, action:2
in function:eth_action_phy_admin_control, line:2697, port3, action:2
in function:eth_action_phy_admin_control, line:2697, port4, action:2
in function:eth_action_auto_neg_admin_control, line:2770, port1, action:2
in function:eth_action_auto_neg_admin_control, line:2770, port2, action:2
in function:eth_action_auto_neg_admin_control, line:2770, port3, action:2
in function:eth_action_auto_neg_admin_control, line:2770, port4, action:2
页:
[1]