输入 brjtag -probeonly /erasechip 全片擦除flash芯片数据
第二部 刷cfe的命令 :brjtag -flash:cfe
https://www.chinadsl.net/thread-46737-1-2.html 这是CFE
完成后 TTL 有反应了,然后
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
*** Board is not initialized properly ***
Press: <enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358MV2G ------- 3
96358M ------- 4
96358B ------- 5
96358BGWE_OEM1 ------- 6
96359PONG ------- 7
96358SV ------- 8
Board Id (0-8) : 0
Number of MAC Addresses (1-32) : 0 12
Base MAC Address : 00:00:00:00:00:00 001fa36534ad
PSI Size (1-64) KBytes : 24 64
Flash Block Size (1-128) in KBytes: 0 128
Auxillary File System Size Percent: 0 24
Main Thread Number [0|1] : 0 0
Flash layout changed. Need to erase all flash except bootrom
Invalid command: "e"
Available commands:
Flash Layout: Boot[0,0xbe000000] Kern[1,0xbe020000]
AuxFS[95,0xbebe0000] Misc[125,0xbefa0000] PSI[127,0xbefe0000]
Flash RootFS Partition Length: 12320768
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80529860 (1214560)
Initialized Data: 0x8041E740 - 0x80421060 (10528)
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1f:a3:65:34:ad
PSI Size (1-64) KBytes : 64
Flash Block Size (1-128) in KBytes: 128
Auxillary File System Size Percent: 24
Main Thread Number [0|1] : 0
udp_send finished
No answer .auto boot ...
CFE>
我下载论坛的联通的固件
进入192.168.1.1 输入密码telecomadmin/telecomadmin
开始刷机
web info: Upload 6864342 bytes, Broadcom image format.
CFE>
Flashing CFE: .
Flashing root file system and kernel at 0xbe020000: ....................................................
*** Image flash done *** !
Resetting board...
就这样了.... 怎么都不行
我刷过论坛很多固件,都不行都上面这样
请教大神是不是我用过清 kernel命令 ,导致内核被清了?
飞