HG522-C可以刷什么固件

chjtyxw

HG522-C可以刷什么固件,BCM6358,s29

chjtyxw

怎么没人回答啊！
我刷了联通红版CWH11结果出现重启
CFE version 1.0.37-102.6 for BCM96358 (32bit,SP,BE)
Build Date: Tue Aug 18 21:06:57 CST 2009 (root@g40420m)
Copyright (C) 2000-2008 Broadcom Corporation.

Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000


Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.100
Gateway IP address                :
Run from flash/host (f/h)         : f
Default host run file name        : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 3
Boot image (0=latest, 1=previous) : 0
Board Id (0-6)                    : HG522_B
Number of MAC Addresses (1-32)    : 10
Base MAC Address                  : 00:10:18:00:00:00
PSI Size (1-64) KBytes            : 24
Main Thread Number [0|1]          : 0

*** Press any key to stop auto run (3 seconds) ***
Auto run second count down: 0

Support Double system.

Flash boot Flag:

chjtyxw

Boot from main system!
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x8026c018
Closing network.
Closing DMA Channels.
Starting program at 0x8026c018
Linux version 2.6.8.1 (root@localhost.qsl) (gcc version 3.4.2) #1 Tue Dec 2 17:2
9:24 CST 2008
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
fInfo.flash_rootfs_available_length = 16252928

*** Board is not initialized properly ***

HG522_B prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 4000 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29344k/32384k available (1908k kernel code, 2996k reserved, 504k data, 7
6k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...  unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
Computing partition layout for flash of size[16777216] sectors[128]
Flash not used for Auxillary File System
Partition ROOTFS_KRN [0xbe020000,   16252928] Blks[124:   1 .. 124]
SubPartition Image 1 [0xbe020000,    8126464] Blks[ 62:   1 ..  62]
SubPartition Image 2 [0xbe7e0000,    8126464] Blks[ 62:  63 .. 124]
Blk# BlkOff Blks BlkSize AvailSize   MemStart     MemLen Partition Name
   0   1408    1  131072    131072 0xbe000580       1024 BOOTLOADER
   1      0  124  131072  16252928 0xbe020000   16252928 ROOTFS_KRN
125      0    0       0         0 0xbefa0000          0 JFFS_AUXFS
125      0    1  131072    131072 0xbefa0000     131072 LOG_SCRPAD
126 106496    1  131072    131072 0xbefda000      24576 TW_PERSISTMEM
127 106496    1  131072    131072 0xbeffa000      24576 PERSISTMEM
Can't analyze prologue code at 801eb814
SCSI subsystem initialized
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v2.0
File system address: 0xbe020100
Registered device mtd[BCM63XX RootFS] dev[0] Flash[0xbe020100,4558848]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
brcmboard: brcm_board_init entry
WIFI: Button Interrupt 0xffff is not enabled
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
u32 classifier
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started:  BusyBox v1.00 (2008.12.02-09:34+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5


BusyBox v1.00 (2008.12.02-09:34+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.


Loading drivers and kernel modules...

atmapi: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
blaadd: blaa_detect entry
fuse init (API version 7.8)
fuse distribution version: 2.7.3
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko': Success (19): Su
ccess
Scratch pad is not initialized.
usbback enable:0
Scratch pad is not initialized.
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
xmlEndCTCfgObj(calling cfm to get appName SystemInfo, objName ctCfg
Error parsing XML configuration: error fatal_err.
BcmAdsl_Initialize=0xC00B6408, g_pFnNotifyCallback=0xC00CF3C4
AnnexCParam=0x7FFF7EA8 AnnexAParam=0x00000980 adsl2=0x00000000
pSdramPHY=0xA1FFFFF8, 0x111F93 0xDEADBEEF
AdslCoreHwReset: AdslOemDataAddr = 0xA1FFBA64
AnnexCParam=0x7FFF7EA8 AnnexAParam=0x00000980 adsl2=0x00000000
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ATM proc init !!!
get qos queue policy type error
Enable = 1
enter QosPriorityQueueTbl::removeAllTCRules

==>   Bcm963xx Software Version: GWH-11_V1.1   <==

buffer=2.6.8.1
can't get Addr: Cannot assign requested address
-----insmod=insmod /lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/ip_conntrack_d
evicectl.ko ip_begin=3232235777 ip_end=3232236030  mode=0 maxTotalNumber=4 maxCo
mputerNumber=1 maxStbNumber=0 maxCameraNumber=1 computerStatus=0 stbStatus=0 cam
eraStatus=0
ip_conntrack_devicectl: load success
sntp: host not found
ipt_time: Unknown symbol ipt_register_match
ipt_time: Unknown symbol ipt_unregister_match
insmod: cannot insert `/lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/ipt_time.k
o': Success (2): Success
ip_syslog_out_ops: load success
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
mount: Mounting /dev/mtdblock1 on /usr/local/ct failed: Invalid argument
umount: forced umount of (null) failed!
flash_eraseall: /dev/mtd2: No such device
mount: Mounting /dev/mtdblock1 on /usr/local/ct failed: Invalid argument
cp: unable to open `/usr/local/ct/?

CFE version 1.0.37-102.6 for BCM96358 (32bit,SP,BE)
Build Date: Tue Aug 18 21:06:57 CST 2009 (root@g40420m)
Copyright (C) 2000-2008 Broadcom Corporation.

Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000