|
楼主 |
发表于 2014-6-29 10:03:46
|
显示全部楼层
昨天只是理论上认为可以,今天加烽火110,果然能出终端信息了!按CTRL+C进CFE界面
HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN
CFE version 1.0.37-104.4 for BCM96328 (32bit,SP,BE)
Build Date: Wed Jan 12 14:58:29 CST 2011 (root@liulibing)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name S25FL128P, id 0x0118 size 16384KB
Total Flash size: 16384K with 256 sectors
Flash not used for Auxillary File System
Blk# BlkOff Blks MemLen Partition Name
0000 001408 0001 0001024 NVRAM
0254 000000 0001 0049152 Backup PSI
0253 000000 0001 0049152 Syslog
0253 049152 0001 0008192 Scratch PAD
0255 016384 0001 0049152 PSI
0000 000000 0000 0000000 JFFS_AUXFS
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-2) : 96328Tavng
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:0a:c2:c3:b5:1a
PSI Size (1-64) KBytes : 48
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 48
Flash Block Size (1-256) in KBytes: 64
Auxillary File System Size Percent: 0
Main Thread Number [0|1] : 0
Enable Small IMAGE [0|1] : 0
ProductClass : HG110
WlSsid : CU_aU8b
WlKey : 2fx1j69e
UserPass : 2fx1j69e
DeviceId : 011100000001011525000AC2C3B51A0000000000000000000000000000000084
StartFlag : 1
send udp message finished.
Not response, auto boot ...
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
PANIC: out of memory!
failed to allocate memory with size: 8388608
PANIC: out of memory!
failed to allocate memory with size: 8323072
web info: Waiting for connection on socket 0.
CFE> ^C
CFE> ^C
|
|